single blade razor

Knowing how to use a single blade razor involves mastering hand-eye coordination in order to achieve a close, smooth shave. Unlike most disposable razors, single blade razors require extreme focus, a few extra materials, and a lot of patience. Thankfully, it is not too difficult to do once you get the hang of it. This article will provide some tips and tricks to get you started.

Gather Materials

When using a single blade razor, you will want to gather a few materials before you begin. Having items close before you begin will prevent you from searching for items once you start. Some of the main items you will need, aside from the razor and a blade, are:

  • A shaving brush.
  • A hand towel or washcloth.
  • Pre-shave lotion.
  • Shaving cream, gel, or soap.
  • Aftershave.
  • Facial moisturizer.
  • A well-lit area.
  • A mirror over a sink.
  • A bowl if you do not have a sink to work with.

Prepare Your Face

When learning how to use a single blade razor, it is crucial to prepare your face properly. Doing so will lessen the chance of nicks, cuts, or pulls during the process.

Steam Your Face

If you are unable to take a hot shower before beginning, fill a bowl or your sink with hot water. The water should be hot; however, it also needs to be comfortable enough to remain on your face.

Soak the towel or washcloth in the water and place it over your face. You will want to hold the towel there for around 20 seconds in order to remove oil from your face and open up your pores.

man steaming his face

Apply Pre-Shave Lotion

You will want to apply a pre-shave lotion to your face, rubbing in the direction the hair grows. The pre-shave lotion will soften up your facial hair and protect your face from irritation. Although it is not a requirement, you may want to consider using a pre-shave lotion that does not contain alcohol as it can be an irritant in itself.

Apply Shaving Cream

Place a nickel-sized amount of shaving cream in the middle of your hand. Use the shaving brush to whip the shaving cream in a circular motion. Once the cream becomes foamy, apply it to your face. Make sure you cover all of the areas on your face where hair grows completely. Check to make sure there is no skin showing through and apply shaving cream on any exposed areas.

Begin Shaving

Once you complete all the preparation steps, you are now ready to learn how to use a single blade razor. You must first remember that faces are generally not smooth. We have rounded edges, imperfections, and dips between bones. As such, proper control is needed to glide around the different areas of the face gently enough to ensure cuts won’t happen.

One way to help the razor move smoothly across the face is by selecting a single blade razor that has a pivoting head. Doing so allows the blade to glide across the curves of the face. Even if you have a straight razor, there are three steps you need to follow to ensure a smooth, clean shave. The steps involve a pass of the razor across the face, each targeting a different goal.

First Pass of the Razor

The first pass of the razor should be done with the grain of your hair. Use long and steady strokes in the direction of the hair growth. Generally, these directions are:

  • On the cheeks: The hair grows north to south. (downward direction)
  • On the neck: The hair grows south to north. (upward direction)
  • On the jaw: The hair grows backward. (toward the back of your head from your chin)

Take advantage of the razor weight, allowing the heaviness of the razor to move along on its own with your guidance. Between each stroke, rinse the razor blade to remove the cream. Shake the razor to remove excess water as this can cause dripping on your face resulting in a loss of shaving cream. Continue this pass until you remove all of the shaving cream with the razor.

Second Pass of the Razor

Apply another layer of shaving cream evenly across your face. Use the same method described earlier to cover all the areas that will be shaved with an even layer of cream.

For the second pass, you will want to shave again in the direction the hair grows. This direction is repeating step one; however, you will want to use shorter strokes this pass. Glide the razor only one to two inches at a time, rinse, and repeat until all of the shaving cream is removed.

This step for how to use a single blade razor is generally used for fine tuning and removing the hair that was missed in the first pass.

Third Pass of the Razor

The third pass of the razor is the final pass in how to use a single blade razor. Apply another layer of shaving cream evenly across your face as done in the previous two steps.

For this pass, you will pass the razor in the opposite direction. The razor will go against the growth of your hair, removing any hair that was left behind. There may be minimal pulling or tugging felt at this stage, but it will not be overwhelming.

Once all of the shaving cream and hair is removed, you are done with the shaving process.

Restore Your Skin

The final part of learning how to use a single blade razor involves restoring your face back to normal. This is one of the most important steps in the process as it ensures your face remains soft, smooth, and irritant-free.

Rinse your face with cold water to remove any excess shaving cream. Cold water works to re-close the pores and keep dirt out. Pat your face dry with a towel. Be sure you do not rub the face as doing so can irritate the skin and cause ingrown hair to occur.

Finish off by applying an aftershave to your skin, followed by a moisturizer.

Wrapping Up

Following each of these steps accordingly will have you well on the way of learning how to use a single blade razor. It may take a few tries, but you will find the motions that feel most natural to you and provide the best shave experience. Feel free to share tips and tricks with others below.

Image Source: 1, 2, 3

LEAVE A REPLY

Please enter your comment!
Please enter your name here